Panelook now have 1 datasheets of
LQ156D1JW03 released by Sharp Corporation (hereafter called
Sharp). According to datasheet with version of LD-D2114603A which was released out on 6 4 2014, LQ156D1JW03 supports display
3840(RGB)×2160 (UHD) with aspect ratio of 16:9 (W:H), whose pixels are arranged in RGB Vertical Stripe, according to calculation of Panelook it's pixel density is 282 PPI. As for mechanical detail, it features active area of 345.6(W)×194.4(H) mm, outline size of 354.78(W)×204.96(H)×0.83(D) mm, with surface treament of Antiglare (Haze 42%), Hard coating (3H), net weight of 139g (Typ.), utilizing 0.30+0.30 mm mm plate. As a IPS, Normally Black, Transmissive CELL product, LQ156D1JW03 can provides 1000:1 transimissive contrast ratio, 88/88/88/88 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 25 (Typ.)(Tr+Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 72% (NTSC). This product have no backlight, With LED Driver. LQ156D1JW03 utilizes eDP (4 Lanes) as it's signal inputting systerm, which connected by 40 pins Connector with power supply voltage of 3.3V (Typ.). It's typical vertical frame rate (Fv) is 60Hz. For more latest product detail of LQ156D1JW03 We strongly recommend that you should refer to datasheet listed on Panelook.com or contact with Sharp or it's distributor. All specification details are inputted by Panelook engineers according to datasheet, but we cannot guarantee the spec listed is entirely correct.